latency

Hello, I was finishing my orchestral template (finally) but I stumbled upon the realization that I actually need to up the VEPro plugin's Buffer Size to not have cracks in the audio when many tracks are playing at the same time. I'm using VEPro 6.5 (latest version before 7). My question is as...

Hey there I was a Cubase user since I started. Then 7 years ago I switched to Ableton (wasn't doing a lot of picture based works back then). Whenever I do a project in Cubase, my sounddesign and my mixes sound boring and not cutting edge because I'm producing like an orchestral-composer, not...

Intel 12th and 13th Gen Intel Core processors (and likely also 14th Gen) have higher latency than 10th or 11th Gen Intel Core processors. This is a problem in the architecture which moved the Input-Output-Hub from the chip onto the mainboard. So, if you think that latency problems in your DAW...

I'm getting over 100ms latency with the stock Cubase Imager! Empty project, one audio track and only the Imager loaded. I've tested with other Imagers, both full-band and multiband, and I'm not getting anywhere close to the same numbers with those. Even with more cpu-intensive plugins like...

Hi there, This may be of interest to some one looking to get a lot of VST Power for their money. We are currently selling our X299 I9 10940X pc with 256 (!) GB RAM installed, fresh Windows 10 install. It has just been overkilled, so moving to a system with 64GB of RAM, and because the system...

Just interested to know what most users on here are working with. It would be nice if people could post something like this: Audio Interface: Line 6 Helix Sample Rate: 48 KHz Buffer: 256 ms DAW (Reaper) reported Round Trip latency: 27 ms using Line 6 Driver OS: Windows 11 Home CPU: Intel i9900k...

Heya, I plan to get a DAC/AMP stack or combo. I intend to route my headphones through them while working with VSTs/virtual instruments. Will I experience latency while recording with my midi controller and such? If I get a stack I will get a topping d10 dac/atom amp and the topping is a USB...

Can anyone advise: I just built a desktop/tower PC with an i7 CPU and 64GB RAM, so with that hardware, to what values should I set samples x buffers? CONTEXT In REAPER's Preferences > Audio > Device > Buffers x samples, how do you determine the two values? That is, how many buffers x how big a...

Hello everyone, I have a problem: Currently I'm using Cinematic Studio Strings and Vienna Symphony Library (CSS and VSL). When I'm using VSL, there is no latency, but when I'm using CSS there is latency which really makes my work hard. - I have almost 10 ms in Kontakt. I use Cubase 11 Pro...

TLDR: What you see is not what you hear. - Summing stems in different DAWs sounds identical. Phase cancellation has debunked that myth. - However, automation curves like saw-down will either be linear or exponential depending on the daw. - Buffer size affects the interpolation of the automation...

Hello everyone - quick question: When installing a plugin on a different drive than your DAW and/or VST folder (assuming both are SSD drives) can that in any way affect the speed/performance of the plugin when using it in the daw?

Hello fellow composers, I recently changed my workflow from having the video in my Cubase sessions to using Non Lethal Applications Video Sync 5. I run VideoSync on a separate MacMini, synced via MTC. At first: Video Slave is awesome and works very well and stable, but I struggle with the...

Hi, I'm new to all this stuff, here's what I have: Roli Seaboard 49 Roland FP30 Digital Piano Tracktion Waveform Free Equator/Equator2 Dell Windows 10 laptop I want to be able to play the seaboard and fp30 together (using the sounds in equator) with no latency on either, and eventually to...

Hi, I have two questions: What is generally the minimum latency accessible for the Vi for a basic project, for a computer and a sound card neither bad nor at the top, a material rather as it should be, even if it is relative. From which latency value do we perceive it? Anyway i've seen a lot...

Hi, I just bought the Motu M4, I just tested the latency in Studio one 4. It's supposed to have good drivers that provide reliable latency (not to mention the computer's capabilities). I had heard that some windows users had problems with the driver, but I heard that the problem was normally...

Hi everyone, I am in the process of transitioning from FL Studio to Cubase, so far I've been able to sort out most of the basics but I still have some things to figure out, and this is one of those. In FL there's simply an icon on the mixer tracks on which you you can click to add or substract...

Is it only me who noticed that build 2004 has improved DPC timings? LatencyMon would usually report 1500-1600 microsec (ntoskrnl) during the first hour when run with Win10 builds 19xx. Same PC with build 2004 never reports >700 microsec (the longest test was ran for almost 24hrs).

So, this seems counter-intuitive to me. (I think I'm in the correct forum for this – apologies if not.) I've been running my DAW (Cakewalk by Bandlab) problem-free on 16GB of RAM. In anticipation of my ambition exceeding my talent at some point in the near future, I have just replaced the two...

Hi My Laptop was out of action for a while because the HDD had crashed. I replaced it with an Samsung EVO SSD recently and there was an immediate improvement in the laptop's performance. Loading time for all software have reduced drastically. Windows loads and shuts down in under 10 seconds...

Hi, I have an issue since about 1 week with Cubase 10.0. I have a "high" audio load average about 1/3 from the gauge + about 350% of CPU used by Cubase process, on fresh start after loading a small template (about 80 instruments tracks + 5 racks + 25 midi track + 10 audio inputs + 2 audio...

using Logic X on a 2017 iMac full specs. even a UAD Quad MKII thunderbolt with a lexicon reverb (or the seventh heaven) will still cause me latency when I put it on the main out. Or is the fact that I put it on the main out the problem? (I have EW Spaces as a bus plugin on all the sections...

Hi! Today I noticed something strange: I passed a track through analog tubes and recorded the result onto another track. The idea being to blend both together in the mix. The buffer was set to 4096 samples. (When I'm not recording a live instrument, I set the buffer to the longest possible...

Hi, Apologies if this is posted in the wrong area. I'm not a scripter but I'm hoping the experts here could shed light on my latency issues with certain libraries. I'm running a macbook 2.5ghz dual core. Internal SSD & 16Gb Ram. DAW Logic Pro X. I am experiencing midi latency during live and...

Can anyone weigh in on this... In a never-ending attempt to work at lower latency settings in MOTU DP, which I'm using with VE Pro Server, both on the same machine (a 2013 Mac Pro)... Do you think having faster thunderbolt external-sample-drives would help, or it just both DP and VE Pro...

I looking to get new audio interface I looking the Presonus Studio 192 mobile or the motu ultralite mk4, both have similar setting I use studio one as main daw so the presonus one look more interesting, but i read some problems about latency, any one had try the studio 192 or mobile ? the motu...

Hi, I'm using a Focusrite Scarlett 2i4 as Audio Interface and I seem to be getting *way* worse performance with their drivers than with Asio4All. My project in Cubase is quite big, and with the Focusrite drivers set to highest latency (which is 10ms, you can't set the buffer in samples, but in...

Hi All, I'm on a mission to reduce the latency in my brand new monster PC. Right now it's sitting around 1000us (as per DPC Latency Checker). I have heard that 100us is possible with a dual Xeon setup. My goal is to use a keyboard controller in Cubase without having to enable "Constrain Delay...